Material Handling Equipment Conveyor Belt Roller Technical Specification

BELT		ROLLER		MOUNTING		HEIGHTDIMENSION"H"
WIDTH		LENGTH		DIMENSIONS		ROLLERDIA "D"
W	L		L3	L1	L2	M-d	76.1	88.98	101.6	114.3	127	139.7	152.4	159	165
400	160		500	690	755	M12	200	200	200	225	225	-	-	-	-
450	190		550	740	805	M12	200	200	200	225	225	-	-	-	-
500	200		600	790	855	M12	200	200	200	225	225	-	-	-	-
600	235		700	890	950	M12	-	-	-	225	225	-	-	-	-
650	250		750	940	1000	M12	-	-	-	225	225	275	-	-	-
750	290		850	1040	1100	M12	-	-	-	225	225	275	-	-	-
800	315		950	1090	1150	M12	-	-	-	225	225	275	275	275	-
900	350		1050	1190	1250	M12	-	-	-	225	225	275	275	275	-
1000	380		1150	1290	1350	M12	-	-	-	225	225	275	275	275	-
1200	465		1400	1490	1560	M16	-	-	-	240	240	275	275	275	290
1400	530		1600	1690	1750	M16	-	-	-	240	240	275	275	275	290
1600	600		1800	1900	1950	M16	-	-	-	240	240	275	275	275	290
1800	670		2000	2100	2150	M20	-	-	-	240	240	275	275	275	290
2000	750		2200	2300	2350	M20	-	-	-	240	240	275	275	275	290

Conveyor Roller Information To Be Supplied With Enquiry or Order

1. For belt width, say 800mm or 1000mm & so on.
2. Degree of picking idlers i.e. 200 or 350 & so on.
3. Angle size to be used i.e. 50x50x6 or 65x65x6 & so on if at all specifically to be stated.
4. Idler pipe size (OD) in mm.
5. Overall O.D. in case rubber lined idlers are reqd. for Impact Idlers.
6. Housing material i.e. CRCA steel or C.I. & so on.
7. Bearing size, type & make i.e. 6205 or 420205 & so on.
8. Idler Roller Quantity in Nos.
9. Your detailed drawing. If possible.

P.no.	DESCRIPTION	QTN	MATERIAL
1	ROLLER PIPE	1	MS-erw
2	BEARING HOUSING	2	CRCA
3	REAR SEAL	1	NYLON-6
4	BEARING	1	STANDARD
5	SHAFT	1	BRIGHT BAR
6	RUBBER SEAL	2	NEOPRENE
7	CIRCLIP	1	HEAVY DUTY
8	SEALS	1	NYLON-6

Carrying Troughing Idlers

Impact Rubber Lagged Rollers

Return Self Align Idlers

Disclaimer: Information's, written and verbal are provided by HIC, relative to its products which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial products should determine for itself the suitability of such products.