Drive Belt Power Capacity Ratings KW/25mm Belt at 100rpm speed

Engine pulley driver teeth type	10	11	12	13	14	15	16	17	18	19	20	21	22	24	26	28	30	32	36	40	44	48
XL (1/5' pitch)	.01	.01	.01	.15	.02	.02	.02	.03	.03	.03	.03	.03	.03	.04	.04	.04
L (3/8' pitch)	.04	.04	.04	.05	.05	0.6	.06	.07	.07	.07	.07	.08	.09	.10	.10	.11	.12	.13	.14	.16	.17	.19
H (1/2' pitch)	-	-	-	-	.19	.20	.21	.22	.24	.25	.26	.28	.29	.31	.34	.37	.40	.43	.48	.53	.58	.63
XH (7/8' pitch)	-	-	-	-	-	-	-	-	.57	.60	.63	.65	.69	.75	.83	.88	.94	1.0	1.1	1.25	-	-
XXH (1-1/4' pitch)	-	-	-	-	-	-	-	-	.99	1.0	1.1	1.15	1.22	1.30	1.43	1.5	1.65	1.8	1.95	2.2	-	-

* Taper Lock bush system pulley also manufactured.

Timing Pulley Information To Be Supplied With Enquiry or Order

• Duty type i.e. extra light or heavy & so on.
• Pitch of pulley i.e. 1/5" or 3/8" & so on.
• No. of driver pulley teeth i.e. 10 or 17 & so on.
• Pulley material i.e. steel or aluminum.
• Quantity in nos.

Disclaimer: Information's, written and verbal are provided by HIC, relative to its products which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial products should determine for itself the suitability of such products.